San Siro Protector
Certified safety vest for harness racing with maximum freedom of movement.
Lightweight, flexible and certified – a safety vest that provides full freedom of movement.
The San Siro Protector is certified to Level 2 according to EN 1621-2 and EN 1621-3, meaning the highest level of protection for back and chest under current EU and UK standards. It is approved for use in harness racing and meets the requirements for personal protective equipment (PPE) in both the EU and the United Kingdom.
An advanced, CE-certified safety vest developed for harness racing, where both protection and freedom of movement are essential. The San Siro Protector is designed to provide a flexible and comfortable fit, while its shock-absorbing construction effectively reduces impact force in the event of a fall or collision. The lightweight and ergonomic design allows the vest to be worn throughout the entire race day without restricting movement during competition.
The vest is constructed with a central back protector and divided chest protectors, positioned in separate, flexible pockets within the vest. The protectors remain securely in place during use but can easily be removed when needed. Thanks to the removable design, the outer fabric can be separated from the protectors and washed, making it easy to keep the vest fresh even with frequent use in stable and racing environments.
Note: No safety vest can protect the wearer against all foreseeable or unforeseeable impacts.
Size chart
| STORLEKAR | 36 | 38 | 40 | 44 | 46 | 48 | 50 | 52 | 54 | 56 |
|---|---|---|---|---|---|---|---|---|---|---|
| Chest (cm) | 84 | 88 | 92 | 92 | 94 | 98 | 102 | 106 | 110 | 114 |
| Waist (cm) | 74 | 76 | 78 | 79 | 82 | 85 | 88 | 91 | 94 | 97 |
| Spine (cm) | 49 | 49.5 | 50 | 54.5 | 55 | 55.5 | 56 | 56.5 | 57 | 57.5 |
When measuring yourself for your vest, it is important to take accurate measurements. To ensure precision, it is recommended that you get help from another person.
- Chest measurement: Start at the centre of the breastbone and measure around the widest part of the chest, under the armpits. Make sure the tape measure is straight and level around the body and that it is snug, but not too tight.
- Waist measurement: Measure around the waist, which is usually located just above the hip bones and below the ribs. The tape measure should be parallel to the floor and sit evenly around the body to avoid incorrect measurements.
- Back length: Sit on a chair. Place the tape measure at the large vertebra at the base of the neck and let it follow the spine straight down to the seat of the chair. Then subtract 5 cm from this measurement to achieve the correct fit.
Remember that accurate measurements are essential for the vest to fit properly, so take your time and double-check your measurements if possible.
- Full-length zipper.
- Outer material and lining in 100% polyester.
- Coccyx protection in viscoelastic soft foam.
- Central back protector, EN 1621-2:2014, level 2.
- Divided chest protectors, EN 1621-3:2014, level 2.
- Certified by SATRA Technology Europe Ltd, Notified Body: 2777, according to M46:2024 specification for safety vests for harness racing and equestrian sports, and PPE Regulation (EU) 2016/425.
- Made in Poland.
- Wash the garment as soon as you notice dirt to prevent stains from setting.
- Carefully remove the SAS-TEC protectors from their pockets and wipe them clean with a damp cloth.
- Always wash Brizy products separately with similar colors to protect material and color.
- Use a gentle 40°C wash program.
- Close zippers before washing.
- Skip fabric softener as it may affect the fabric quality and color.
- Do not tumble dry or dry clean. Allow to air dry in a well-ventilated area at room temperature.
- For stubborn stains, treat immediately and soak the garment after use. Keep it damp until washed.
Delivery
All our deliveries are handled via UPS.
Delivery times and costs vary depending on the destination.
Return Policy
Returned items must comply with our return policy. Items must be undamaged, unused, and in their original condition, with all labels and packaging intact.
Returns are accepted within 30 days from the delivery date. To initiate a return, please use the pre-printed return form included in your package and follow the return procedures specified on our website.
We do not accept returns that are not sent using our return label. If you choose to use another carrier for your return, we will not accept the package at our warehouse or issue a refund for your order.
Please note that a return fee may be charged to cover return shipping costs. The fee varies by region.
Personalized products cannot be exchanged or returned, including custom-measured items, promotional items, and embroidered products.
Refunds
Refunds will be issued once the returned items have been accepted.
Refunds are processed within 14 days.
The refund will be issued to the original method of payment.
